•Recommended amplifier power 30 : 180 Watts per channel
•Power rating : 110 Watts RMS,275 Watts peak
•Maximum SPL: 113.5 dB (110 Watts RMS/1m),117.5 dB (275 Watts/1m)
•Sensitivity : 93dB (2.83Volts @ 1 metre)
•Nominal impedance : 8 Ohm
•Frequency response : 34Hz - 25kHz
•Dispersion : 90 degree conical
•Total harmonic distortion : Less than 1.5% at 110 Watts RMS (50Hz - 20 kHz)
DRIVE UNIT
•Driver type 254mm (10") Dual Concentric¢â utilising paper pulp cone with twin roll impregnated fabric surround
•Low frequency 52mm (2") edge-wound voice coil High frequency 33mm (1 1/3") edge-wound voice coil
CROSSOVER
•Crossover type Bi-wired,hard-wired passive, low loss,2nd order compensated LF.1st order HF Crossover frequency adjustments 1.3kHz
+/-3dB over 1.3kHz to 25kHz shelving
CABINET
•Enclosure type : Distributed port
•Volume : 100 litres (3.5 cu. ft.)
•Dimensions : 950mm (37 3/8") x 456mm (17 15/16") x 366mm (14 3/8")(H x W x D)
•Weight 30 kilograms : (66lbs)
•Construction Walnut veneered 18mm (3/4") particle board
•Solid walnut edging
PACKAGE DETAIL
•Dimensions : 1040mm (41") x 540mm (21 1/4") x 420mm (16 1/2") (H x W x D)
•Weight : 36 kilograms (79.4 lbs)
¡¡ |